Product ID:STYCAST 2651-40 BLACK
MSDS Date:12/31/1998
FSC:5970
NIIN:00-787-8319
Kit Part:Y
MSDS Number: CKTDJ

EMERSON AND CUMING

46 MANNING ROAD
BILLERICA, MA 01821
US

Emergency Phone: (800)424-9300

Info Phone: 978-436-9781

Preparer: DAVID HAAS

Cage: UO004

MCKEOWN ROBERT CO. INC.

SOMERVILLE, NJ 08876 US

Telephone: 908-218-9000

Cage: 7B953

DGEBA EPOXY RESIN

CRYSTALLINE SILICA

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.1MG/M3

MICA

CAS: 12001-26-2

RTECS: VV8760000

OSHA PEL 20 MPPCF

ACGIH TLV: 3 MG/M3

PHENYL GLYCIDYL ETHER

CAS: 122-60-1

RTECS: TZ3675000

OSHA PEL 60 MG/M3;10 PPM

ACGIH TLV: 0.6 MG/M3;0.1 PPM

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:UNKNOWN IARC:YES
Health Hazards Acute and Chronic:EYE CONTACT: CONTAINS MATERIALS
IRRITATING TO THE EYES. SKIN CONTACT: CONTAINS MATERIALS WHICH
CAUSE MODERATE SKIN IRRITATION. PROLONGED OR REPEATED EXPOSURE TO
THE LIQUID MAY EXERT A DEFATTING ACTION ON THE SKIN, POSSIBLY
RESULTING IN DERMATITIS. THIS PRODUCT MAY CAUSE SKIN SENSITIZATION/
ALLERGIC SKIN REACTIONS WHICH MAY BE SEVERE IN CERTAIN INDIVIDUALS.
INHALATION: HEATING CAN GENERATE VAPORS THAT MAY CAUSE
RESPIRATORY IRRITATION, NAUSEA AND HEADACHES. INHALATION HAZARD AT
ROOM TEMPERATURE IS UNLIKELY, DUE TO THE LOW VOLATILITY OF THIS
PRODUCT. INGESTION: HARMFUL IF SWALLOWED.
Explanation of Carcinogenicity:IARC: DGBA EPOXY RESINS ARE NOT
CLASSIFABLE AS CARCINOGENS. IARC CLASSIFIES FREE CRYSTALLINE SILICA
AS A CLASS 2 CARCINOGEN. IARC HAS CLASSIFIED FREE CARBON BLACK AS A
CLASS 2B CARCINOGEN. IARC HAS CL ASSIFIED PHENYL GLYCIDYL ETHER AS
A CLASS 2B CARCINOGEN.
Effects of Overexposure:EYE CONTACT: BLURRED VISION, BURNING SENSATION
AND TEARING. SKIN CONTACT: DEFATTING OR DRYING ACTION ON THE SKIN,
DERMATITIS, SKIN SENSITIZATION/ALLERGIC SKIN REACTIONS WHICH MAY BE
SEVERE IN CERTAIN INDIBIDUALS; SYMPTOMS INCLUDE RASH, ITCHING,
HIVES, SWELLING OF THE EXTREMITIES. INHALATION: RESPIRATORY
IRRITATION, NAUSEA AND HEADACHES.
Medical Cond Aggravated by Exposure:EXPOSURE MAY AGGRAVATE PREEXISTING
SKIN AND/OR EYE DISORDERS.

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES, HOLDING EYELIDS OPEN.
GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING AND FLUSH
AREA OF SKIN WITH PLENTY OF WATER. FOLLOW BY WASHING WITH SOAP AND
WAT ER. GET MEDICAL ATTENTION IF IRRITATIONPERSISTS. PROPERLY CLEAN
CONTAMINATED CLOTHING BEFORE REUSE. INHALATION: MOVE TO FRESH AIR.
GIVE OXYGEN IF BREATHING DIFFICULT. GIVE ARTIFICIAL RESPIRATION IF
NO T BREATHING. GET MEDICAL ATTENTION. INGESTION: GIVE PLENTY OF
WATER TO DRINK, IF VICTIM IS CONSCIOUS AND ALERT. NEVER GIVE
ANYTHING BY MOUTH TO A DROWSY, UNCONSCIOUS, OR CONVULSIVE PERSON.
GET MEDICAL ATTENTION.

Flash Point:>93.3C, 200.F
Lower Limits:N/E
Upper Limits:N/E
Extinguishing Media:USE CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:FIREFIGHTERS/RESCUE PERSONNEL SHOULD WEAR
POSITIVE PRESSURE SELF-CONTAINED BREATHING APPARATUS AND FULL
PROTECTIVE EQUIPMENT. COOL EXPOSED CONTAINERS WITH WATER TO PREVENT
PRESSURE BUILDUP. IF LARGE Q UANTITIES OF MATERIAL ARE INVOLVED,
EVACUATE AREA AND FIGHT FIRE FROM A SAFE DISTANCE.
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
BE TOXIC. CLOSED CONTAINERS MAY VIOLENTLY RUPTURE UNDER FIRE
CONDITIONS. REACTION WITH CURING AGENTS IS EXOTHERMIC; SMOKE OR
TOXIC FUMES MAY BE EVOLVED IF HEA T OF REACTION BECOMES EXCESSIVE
DUE TO HIGH CURING TEMPERATURES OR CURING OF LARGE MASSES OF
MATERIAL.

Spill Release Procedures:STOP SOURCE OF SPILL. ACTIVATE EXHAUST
VENTILATION IN AREA. DIKE AREA TO PREVENT RELEASES TO SEWERS,
DRAINS, WATERWAYS. COLLECT SPILL FOR SALVAGE/DISPOSAL. APPLY
ABSORBENT MATERIAL TO SOAK UP RESIDUE . WASH AREA WITH SOAPY
WATER. PREVENT RUNOFF FROM ENTERING WATERWAYS. TRANSFER ABSORBED
MATERIAL AND WATER RINSES TO CONTAINERS. DISPOSE OF IN ACCORDANCE
WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

Handling and Storage Precautions:EMPLOYEES MUST BE PROPERLY TRAIN IN
SAFE HANDLING OF THIS PRODUCT PRIOR TO USE. STORE IN COOL, DRY
LOCATION WITH ADEQUATE VENTILATION. KEEP CONTAINER TIGHTLY SEALED
WHEN NOT IN USE. KEEP AWAY FROM OPE N FLAMES AND HEAT SOURCES.
CONSULT THE PRODUCT TECHNICAL BULLETIN FOR DETAILED STORAGE
INFORMATION.
Other Precautions:BECAUSE USAGE CONDITIONS VARY DEPENDING ON CUSTOMER
APPLICATION, SPECIFIC SAFE HANDLING PROCEDURES SHOULD BE DEVELOPED
BY A PERSON KNOWLEDGEABLE IN THE INTENDED USAGE CONDITIONS, AND
EQUIPMENT. EMPLOY EES MUST BE TRAINED IN SAFE HANDLING OF THIS
PRODUCT PRIOR TO USE.

Respiratory Protection:USE AN APPROPRIATE, PROPERLY FITTED RESPIRATOR
IF EXPOSURES EXCEED PEL/TLV VALUES. THE TYPE OF PROTECTION SELECTED
(SCBA, AIR-PURIFYING, ETC.) WILL DEPEND UPON THE CONDITIONS OF USE.
OBSERVE OSHA REGU LATIONS FOR RESPIRATORY PROTECTION (29 CFR
1910.134).
Ventilation:PROVIDE EFFECTIVE MECHANICAL EXHAUST VENTILATION TO DRAW
VAPORS, MISTS OR FUMES GENERATED DURING PROCESSING AWAY FROM THE
WORKER AND PREVENT ROUTINE INHALATION.
Protective Gloves:WEAR APPRIOPRIATE PROTECTIVE GLOVES.
Eye Protection:CHEMICAL SAFETY GLASSES, SPLASH-PROOF CHEMICAL GOGGLES,
OR FACE SHIELD.
Other Protective Equipment:IF NECESSARY, A PROPER CHEMICAL-RESISTANT
APRON AND ADDITIONAL IMPERVIOUS CLOTHING SHOULD BE USED TO PREVENT
SKIN CONTACT AND CONTAMINATION OF CLOTHING. EMERGENCY EYE WASH
FACILITIES AND SAFETY SHOWER.
Work Hygienic Practices:WASH HANDS AND FACE THOROUGHLY AFTER HANDLING
THIS PRODUCT AND BEFORE EATING, DRINKING OR SMOKING.
Supplemental Safety and Health
THIS ENTRY DESCRIBES 0NE ITEM, STYCAST 2651-40 BLACK. A TWO PART KIT,
SEE MSDS SERIAL "CKTDW".

HCC:B2
Boiling Pt:B.P. Text:ND
Vapor Pres:<1 MM HG @ 25C
Vapor Density:>AIR
Spec Gravity:1.60
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK LIQUID, PUNGENT ODOR.
Percent Volatiles by Volume:<3

Stability Indicator/Materials to Avoid:YES
INCOMPATIBLE WITH STRONG OXIDIZERS, ACIDS, BASES; UNCONTROLLED MIXING
WITH AMINES, ANHYDRIDES, MERCAPTANS, IMIDAZOLES MAY CAUSE HAZARDOUS
POLYMERIZATION.
Stability Condition to Avoid:PRODUCT IS STABLE UNDER NORMAL HANDLING
AND STORAGE CONDITIONS.
Hazardous Decomposition Products:CO, CO2, ALEDEHYDES, ACIDS AND OTHER
ORGANIC SUBSTANCES MAY BE FORMED DURING COMBUSTION. THE CHEMICAL
NATURE AND QUANTITY OF DECOMPOSITION BY-PRODUCTS VARY WIDELY
DEPENDING ON CONDITION OF COMBUSTION.
Conditions to Avoid Polymerization:IHAZARDOUS POLYMERIZATION WILL NOT
OCCUR. SEE "MATERIALS TO AVOID" ABOVE.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH CURRENT FEDERAL,
STATE AND LOCAL REGULATIONS.

Toxicological Information:ALTHOUGH THE SIGNIFICANCE IS UNKNOWN, THE
DGEBA EPOXY RESIN IN THIS PRODUCT HAS BEEN SHOWN TO BE MUTAGENIC IN
COME MICROBIAL TESTS, BUT HAS FAILED TO SHOW MUTAGENICITY IN
OTHERS. CHROMOSOMAL ABERRATIO NS WERE OBSERVED IN CULTURED RAT
LIVER CELLS. PROLONGED EXPOSURE TO FREE CRYSTALLINE SILICA MAY
CAUSE SCARRING OF THE LUNGS, WITH COUGH AND SHORTNESS OF BREAATH. A
DELAYED LUNG DISEASE, SILICOSIS, MA Y RESULT FROM PROLONGED
BREATHING OF FREE CRYSTALLINE SILICA. PHENYL GLYCIDYL ETHER HAS
BEEN REPORTED TO PRODUCE NASAL CANCERS IN LIFETIME INHALATION
STUDIES ON RATS AT CONC'NS OF 12 PPM.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Transport Information:D.O.T. INFORMATION: RESIN COMPOUND, N.O.I-
NON-REGULATED. FREIGHT CODE: 2015.

SARA Title III Information:THIS PRODUCT DOES NOT CONTAIN ANY SUBSTANCES
REGULATED BY THE SARA SECTION 313 AMENDMENTS TO RCRA.
Federal Regulatory Information:TSCA STATUS: ALL COMPNENTS OF THIS
PRODUCT ARE LISTED IN THE EPA TOXIC SUBSTANCE CONTROL ACT
INVENTORY. THIS PRODUCT CONTAINS THE FOLLOWING SUBSTANCES WHICH ARE
SUBJECT TO TSCA SECTION 12(B) EXPORT N OTIFICATION REQUIREMENTS:
DIGLYCIDYL ETHER OF BISPHENOL A (1675-54-3).